Blog
10/17/2026 12:38:49 AM
Caeruleaphile
a person who loves the color blue, its various shades, and its hues.
Someone deeply attracted to or fond of the color blue, such as cobalt, sky blue, or deep ocean blue.
Caeruleus: Derived from Latin, meaning "dark blue" or "sky blue" (often linked to caelum, meaning sky).
phile: Derived from the Greek word philos, meaning "lover of".
It is not a formally recognized dictionary word, but rather a modern, poetic, and nonstandard term.
Blue is the only color which maintains its own character in all its tones.
It will always stay blue.” – Raoul Dufy
The Color Blue
A survey conducted across 10 countries found that blue is the most popular “favorite color” worldwide.
In the United States, 40% of men and 24% of women prefer blue.
What psychological effect does blue have on us?
Color psychology helps us understand how different colors affect mood, emotions, and behavior.
Many people see blue as non-threatening, often describing it as traditional.
Blue tends to evoke feelings of calmness and relaxation, often described as peaceful,
tranquil, secure, and orderly.
People associate blue with stability and reliability.
Blue can also evoke feelings of sadness or aloofness.
For example, art from Picasso’s “Blue Period” often feels lonely or forlorn.
Studies show that people are more productive and creative in blue-colored rooms,
which is why blue is often chosen for office decor.
However, as a cool color, blue can also feel icy, distant, or cold.
Individual experiences significantly influence how colors affect our moods.
“I never get tired of the blue sky.”– Vincent Van Gogh
And Where Are We Going with This?
We have completed glazing our current bisqueware (includes two glaze firings from one bisqueware kiln load),
with only five pieces remaining to be glaze-fired.
There are not enough pieces to kiln-fire the third consecutive glaze firing.
That means we have to produce more pottery (greenware) in order to accumulate
enough pieces to high-fire the kiln once again, including these five (5) remaining vessels,
two (2) sgraffito pieces for me, and three (3) glaze layered pieces for Dennis.
Once again, Dennis and I have given ourselves assignments for our next batch of pottery:
Each piece of our new projects must include these colors:
Blue - Teresa
Gray - Dennis
Brown - Dennis
Most of my emphasis will be on the color blue, and hopefully will carry over to future pottery.
Not just any blue, but Cobalt blue.
Cobalt blue is a cool, semi-opaque, clean medium to dark blue with neutral temperature qualities.
Cobalt blue is known for exceptional resistance to fading.
Cobalt blue represents clarity combined with intensity.
It is one of the most chromatically pure blues, often perceived as confident and forward-moving.
I chose Cobalt blue because it is a medium to dark blue, and can be lightened with any of these Amaco glaze line products - White (Velvet underglazes), Mixing Clear or Snow (Celadons) or White Satin Matte (Satin Mattes).
Dennis has fallen in love with the Opulence (Mid-South Ceramics) gray glazes.
He's always loved London Fog, but on these recent projects he's discovered - Winter Day.
Winter Day is slightly lighter and warmer than London Fog.
I, too am intrigued with these grays, hopefully combining their neutrality to my cobalt creations.
Dennis has also discovered Amaco's Ironstone and Temmoku - glazes with a warm, earthy neutral ground.
Although I utilize Mayco's Black Walnut or Cordovan on many of my rims, I DO think of brown
(the umber colors) as manly colors - bite my tongue - however, my opinions are just that - opinions.
I love the neutral umbers and grays as they play nicely with any color they sit next to; they are easy to get along with.
Neutral colors are muted, low-saturation shades that easily complement almost any other hue (color):
White / Off White
Black / Gray
Brown / Tan
Beige /Taupe
We try to incorporate at least one of these neutrals in all of our pottery.
In a glazed piece with many colors, a neutral acts as a ground,
or a place to rest one's eyes from all the excitement of multiple colors.
I will also include Green, as a neutral color.
Glazing pottery for almost ten (10) years now, I've begun to notice a comforting,
soothing neutral in the more muted greens, such as Jade or Sage.
Even Mint green has a soothing effect when devoured in large, delicious quantities -
especially with a dark brown crunchy coating - chocolate or carob, perhaps.
Well, it's time to begin this next pottery chapter.
The assignment this time around is - color.
We are color-coded for this next pottery mission.
It takes us - especially me - a long time to load a greenware kiln, as our pieces are pretty detailed.
Thank you for reading my books - I mean blog posts.
Pottery is a lifelong learning process.
We have discovered our clay (porcelain), and MOST of our preferred glazes.
Our creative techniques are constantly and continuously being refined, redefined and reimagined.
10/13/2026 5:45:29 PM
On January 5, 2017, my son, Dennis, and I took our first-ever wheel-throwing pottery class in Wilmington, North Carolina.
Let me first interrupt my train of thought, so I can forget where I was within a few sentences.
I'm taking you back to my high school days - W-A-A-A-Y Back!
1973, I believe.
I asked Mrs. Larsen (my art teacher) . . . What are these machines here in the corner?"
Mrs. Larsen replied, "Those are potters wheels. They are used to make pottery".
That was it - my answer from Mrs. Larsen.
I wish I could tell you that was the beginning of a long and lustrous career wheel-throwing pottery, however - I can't.
Mrs. Larsen was definitely NOT a wheel-thrower.
She was more into fashion design and textile design.
So, I found some clay, and decided to see what this machine could do.
I remember making a cone of sorts, as I knew nothing about opening up the cone, and pulling up the sides.
A fellow classmate was watching me spin this cone round and round,
and with one heavy-handed swoop of his palm - SPLAT!
He even used that exact word as he squashed my cone - SPLAT! - followed by extreme laughter on his end of the joke.
I called him a "B" word, and of course Mrs. Larsen heard me, and reprimanded ME.
That was it for my lustrous wheel-throwing career at the tender age of 17.
It would be 44 more years - 9 years ago - before I attempted wheel-throwing again.
NOW - Where was I?
O.K. I remember now.
There were a couple of reasons I wanted to take a wheel-throwing class.
1) I needed to make functional vessels out of a material that would allow me to attach
mosaic tiles in order to create landscapes in mosaic.
The concrete adhesive bucket I made was just not that attractive.
I needed some REAL pots to adhere tiles to.
Soon realizing that pottery has its own unique design possibilities,
I grew away from mosaics in order to pursue - GLAZES!
2) I wanted something Dennis and I could do together, moving forward with different aesthetics,
utilizing the same medium - GLAZES!
I wanted Dennis to have a creative outlet to express his personal, colorful view.
Many times I attempted to sway him towards, painting, pastels, drawing;
all of which he soon became bored with.
Perhaps with one exception - watercolors.
It wasn't long before pottery consumed both of us.
After completing my first (fairly) successful (small) pot, it was time to purchase glazes for brushing,
because Dennis was the dunker and dipper;
I did not like dunking and dipping.
I found it frightening, actually.
Once you dip your piece of pottery in that 5-gallon bucket, you have no more control over it.
I NEED to make drawings on my pots, and color them, as you would a painting.
So the very FIRST glazes I purchased were NOT Underglazes, as one might have thought -
NO - they were Amaco's High Fire Celebration glazes.
The two colors in the main photograph, to be exact - Scarlet Red and Orangerie.
Those are the two ORIGINAL jars, as well.
The manufactured date on the jars is 2016.
Both colors still kiln fire beautifully, just as they did when brand new!
I glazed polka dots yellow and the background of the small pot red - or vice versa.
The shine was impeccable.
After this (fairly) successful piece, I purchased more colors.
THEN - I discovered underglazes -
then Potter's Choice glazes -
then Amaco Shino glazes -
then Celadon glazes.
My High Fire Celebration glazes took a back seat.
The Amaco High Fire Celebration glazes also - were not mixable.
I could not mix yellow with blue to make green, or scarlet with blue to make purple.
At least - that's what I thought!
Just recently, I emailed Amaco Brent to ask if their High Fire Celebration glazes were mixable,
as the Celadon glazes, and the Satin Matte glazes are 100% mixable.
The response from Amaco was that the mixability of Celebration glazes has never been tested.
No one has ever experimented with them to find out the answer.
This sounds interesting to me.
I will make some test tiles - as seen in the main photo of this blog.
NOW, I must tell you, I do not have ALL the Celebration glaze colors.
These are the colors I have:
Baby Blue
Bright Yellow
China Blue - which never shines for me. (Perhaps I need to apply thicker).
Orangerie
Scarlet Red
Sahara White - a High Fire glaze from the Sahara line.
Unfortunately, Amaco does NOT make the Green anymore.
As a matter of fact they only manufacture 9 of the 18 original colors.
Celebration glazes are combined with some of their Sahara glazes,
and are now collectively called The High Fire line of glazes.
This high-fire line also includes HF-9 Zinc-free Clear and HF-10 Clear.
So, I purchased glaze colors I was hoping I could MIX to make secondary colors.
To my most pleasant surprise, the glaze colors I have ARE MIXABLE.
The only trouble I had was mixing a green.
Even adding China Blue or Baby Blue to Bright Yellow did not achieve a nice "grass" green.
The result was green - definitely green, but not a bright green as the original Celebration green was.
I then attempted adding a pinch of dark teal Mason Stain to the Bright yellow, and it still produced
an avocado green, not a grass green.
In my quest for the perfect "grass" green I ordered Victoria Green Mason Stain, and have yet to try it, however,
there is great hope that this will work.
Here's a serious problem for me.
I ordered the High Fire Sahara White (HF-11), as I wanted to make tints.
NOT GOOD!!!
The colors were GREAT - BUT -
Every color I added the white to resulted in tiny dots all over the color - EVERY SINGLE Color.
Is it because the White is a Sahara color, and not an original Celebration color?
Perhaps the Sahara white is not a true gloss white.
Could be - I don't know.
I'm going make some more test tiles and attempt tints of the Celebration colors with my
Coyote white, and my Opulence white.
We'll see what happens.
One thing IS for sure - the Celebration colors I have are mixable.
Well . . . long-winded, once again.
My blog post has turned into a book.
More experimentation is required, and looking forward to some more test results.
8/12/2026 11:53:28 AM
In 2018, Dennis and I took a class in Asheville, NC called "Amazing Glaze".
The instructor was Gabriel Kline.
He showed us how to make the typical test tile on the potter's wheel.
It was a large ring, which he sliced into sections to create test tiles.
I had always wondered how the shape was formed.
Then Gabriel said something in regard to making your test tiles actual pottery,
so you can sell them afterwards, if you wanted to.
This is what stuck in my mind - MINIS.
Miniature pottery is NOT easy to make, as one might think. It is so small and CUTE.
If you're used to wheel-throwing 2 pounds of clay, then readjusting to 2 ounces of clay is definitely an adjustment.
Some people create miniatures on a miniature potter's wheel,
and some potters wheel-throw "off the hump" to produce miniature pottery.
Personally, I just use my normal sized potter's wheel and work with a tiny bit of clay on the wheel head.
I don't make enough minis to justify a miniature wheel, and working off the hump is . . . NOT a good idea for me.
I don't even sell my minis.
Usually, they are given away as gifts to return customers.
I use miniature pottery to test layering combinations, or a new glaze to see if it's a runner.
Better to "test" these things before they are brushed on a large piece of pottery.
Once brushed on a larger piece of pottery, the outcome is sometimes slightly dissimilar,
but USUALLY the results are very similar to the test tile, if the same clay is used, and fired to the same temperature.
It is rare for me to use the same layering technique twice, as we are not production potters, and do not make the same exact pots twice.
If we like the outcome of a layered effect, we write it in our pottery journals,
so we can forget about it when we need it again!
It's the truth!
Oh! "Now, what were those colors I used?"
For these little pots (pictured in this blog post),
I DID write the layering order and number of layers in my journal.
A good layering combination result gets a little heart next to it.
The drawing is of the exact shape of the actual bowl.
The colors we layer are USUALLY Amaco Potter's Choice glazes,
which we have been using since we began our wheel-throwing journey,
so the colors are recognizable to us.
Now, as far as colored porcelain test tiles are concerned, the process is much more exact.
Every colored porcelain color gets an oval test tile with some texture on the bottom third of the tile.
I punch a small hole near the top, so I can hang all the tiles up, SOMEDAY - MAYBE!
It's more fun to dump all of our colored test tile colors on the table, and rearrange them to our liking.
Yep! Number 46 goes with number 25. Let's mix up a batch of both colors!
A number is pressed into the back of these tiles,
which corresponds to the number in my porcelain colored clay mixing book.
The exact percentages of Mason Stain color added to the clay are written down,
so when I need to mix another batch, it is exact.
This technique is very accurate, providing I don't throw the book away, which I did - ONCE!
Once was enough!
After these test tiles are bisque fired (first firing to Cone 04 - 1945º Fahrenheit),
a clear gloss is applied to the front, just as I would to a piece of pottery.
The test tile is glossy on one side, and without a glaze on the back,
so I can compare the two finished looks - glossy / matte.
If you like the element of surprise, test tiles are not necessary.
However, I've discovered, the element of surprise is not for me.
Too many unpleasant surprises.
Even if I don't take accurate notes in my journal about what clay color I used (test tile color),
I forget what colors I can use to decorate the pottery after bisque firing.
With colored porcelain, you can not accurately see the color until the final, high fire.
In the raw state and the bisque state, the color is pale in comparison to the final high fire,
as the color intensifies, the higher the heat.
The reason miniature pots are not made for the colored porcelain test tiles is they can't be given away.
They are used all the time to choose porcelain clay colors.
It is more difficult to store little pots,
than it is to store, or even hang flat ovals.
Tiny test tiles are a huge part of our Colored Porcelain Clay Journey.
They are an essential ingredient for successful pottery.
8/12/2026 11:39:34 AM
With our Celadon Series behind us - well kind of -
we’ve got colored porcelain wrapped in damp cloth and plastic, ready for wheel-throwing some colorful creations.
Dennis has discovered a lot about his preferred colors during our Celadon Challenge.
He gravitates towards the blue-green spectrum of things; especially aqua.
Another jar of Amaco Aqua Celadon is in order.
Layering glazes is Dennis’s favorite way to express his inner creativity.
So what we’re doing is adding some drippy’s to his Celadon, sgraffito creations.
The planter with matching saucer is a great example of what Dennis likes to make.
It was a large project for Dennis, but I think it came out beautifully,
giving him incentive to make more planters with matching saucers.
Dennis prefers transparent glazes, and drippy effects - Amaco Celadons and Amaco Potter’s Choice glazes.
I prefer opaque glazes and STABLE painterly effects - Amaco Velvet Underglazes and Amaco Satin Mattes.
Yes!
We CAN live under the same roof!
It really IS possible.
Sounds like I’m an advertisement for Amaco Glazes, but I can assure you, no one has reached out to me.
That’s a little humor.
It’s just that through nine (9) years of making functional pottery, these are the glazes we feel most confident with.
Pretty much staying clear of the newer glaze colors, and sticking with the older, tried and true colors that we began our clay journey with.
Recently, Amaco’s Teal Drift Phase Glaze DID attract my attention, and it IS A BEAUTY!
That’s the only Phase Glaze color I have.
I’m thinking about another color - just thinking - OUT LOUD.
It is beneficial to check Youtube videos for newer glazes to see what the potter on camera thinks about them with kiln fired examples of the glazes.
Mayco does have some stable glaze colors that are my go-to colors -
Cordovan, Black Walnut, Wintergreen are utilized quite often on my taped designs,
but also Cenote crystalline glaze is truly gorgeous. (My opinion).
Mayco Light flux is our preferred drippy flux glaze.
Coyote has some beautiful pink glazes, as pinks are not easy to find -
Rhubarb, Sunset Pink, Archie's Base.
Opulence (Mid-South Ceramics) manufactures a color that is almost impossible to find
in such abundance - GRAY, unless you're British, then it's GREY.
These gray glazes are indispensable.
One of Dennis's favorite glazes - London Fog.
Polished Stone, Winter Day and Overcast.
Gray is such a beautiful neutral color.
It goes with everything, and these Opulence grays layer beautifully with other glazes.
I do find Gum Solution beneficial for brush application of these glazes.
The Amaco Celadon challenge (assignment) was really gratifying and we achieved some unexpected results.
It was good!
A very rare successful Cone 6 kiln firing with NO throw-a-ways.
Now, we are free to experiment with anything, which usually means I have
NO direction and NO designated path.
There are so many techniques and glaze options that I sometimes develop light headedness deciding what to do next.
Not really.
After finishing a project, the next project appears, even if it was not planned on my
“Pottery To Do List”.
Yes! I do have a Pottery To Do List.
Dennis plans to continue his Celadon glazes, combined with Potter’s Choice glazes adventure.
The Celadon challenge has inspired him, and he wants to make more planters as well as bowls.
I plan on “painting” some pottery with underglazes.
After completing a small bud vase with a landscape on greenware (raw clay), it was apparent the process was very comforting.
Because underglazes dry true to color, (lightening slightly) I can see the color pretty much how it will kiln fire -
ONLY they fire DARKER and usually BRIGHTER.
The Amaco Satin Mattes are so beautiful when kiln fired, that I must glaze some pieces with them.
They are all food safe, lead-free and fire to cone 5-6.
The fired surface is very smooth and well . . . satiny.
It IS difficult to differentiate the colors after they dry on bisqueware.
Initial firing is the bisque firing - Cone 04 (1945 degrees Fahrenheit).
Amaco Satin Mattes are NOT intended for glazing raw clay - only bisqueware.
In my mind, bowls of all shapes are the most enjoyable pottery forms to create and decorate.
They are functional and can cross over to the sculptural realm of artistry.
My next project, however, will be wheel-thrown lavender clay that will be decorated with
something that requires an overglaze of pearl lustre - a total of three (3) kiln firings.
Lots of little pearls.
Zoning out on pearls - who knew.